-
Thermal conductivity range: 0.01 to 500 W / mK Thermal diffusivity range: 0.01 to 300mm² / s The system includes: - Trident Thermal Property Analyzer Electronic Control Unit - Standard Laptop with Windows 10® Operating System - Small Volume Test Cell - Pelican ™ Transport case - C-Therm TC3 ™ Software License Modified Transient Plane Source 1 × MTPS Sensor - Thermal conductivity: 0.01 to 500 W / mK (Max-k) - Temperature: -50ºC to 200ºC (optional up to 500ºC) - Test materials: solids, liquids, powders, pastes Reference Material: Expanded Polystyrene (EPS), LAF6720, Pyrex, Pyroceram, Phosphate Bronze, Copper Transient Plane Source 3 × Flex TPS (hot disc) Kapton based sensors - Thermal conductivity: 0.03 to 500 W / mK - Temperature: -50ºC to 80ºC (optional up to 300ºC) Reference material: stainless steel 304 (x2) Transient Line Source 1 × 150mm TLS Needle Probe - Thermal conductivity: 0.1 to 6 W / mK - Temperature: -55ºC to 200ºC - Test material: viscous / viscous liquids, non-consolidated solids, molten polymers Reference material: Glycerine Climate cabinet is available separately.
-
Circular cutting blades, for safe, fast and accurate cutting of round samples with a given diameter or surface, and up to a thickness of 5mm. Suitable for a variety of materials, including foil, paper, cardboard, foam, textile, non-woven and carpet. The test samples are weighed to determine the weight per unit area, but are also used as test samples for water column tests, wear and pilling tests, etc.
-
Testing flame resistance. Various attachments for vertical testing on flame-resistant textiles and small toys. Can also be equipped with a radiation source for testing according to EN 13772. Measurement of the vertical flame propagation in curtain textiles due to the heat released during a developing fire Most important features: Extensive library of pre-programmed EN, ISO and BS standards. Programming function for own tests. Optional radiation source for EN 13772. Range of interchangeable test frames and burners. Automatic flame ignition and sample ignition. Optional test room, specially designed for the Flexiburn. 18 months warranty UKAS accredited calibration for Flexiburn, test frames and burners.
-
The test results are clearly displayed on the built-in control panel. This panel shows all essential test parameters, such as the test speed, the force and the load. QuickTest can be set to automatically return to the starting position. This makes it easy to program repeats. This feature reduces setup time, giving operators the ability to run the same test cycle a total of 9999 times before having to re-enter settings.
-
Specially designed for testing textiles, non-woven and leather in various forms: yarns, fabrics, clothing and the safety of accessories. The combination of technical innovation and intuitive contributions from users has led to the realization of this user-friendly test device. With the intelligent and easy to use "TestWise" software you can get started with 3 clicks. The extensive library of test routines, together with the wide variety of clamps and grippers, make it possible to test according to a large number of international and customer-specific standards. A few features: Wide range of clamping tools for custom and standard test routines Rapid change of clamping pieces and power cells Testwise software with an extensive file of pre-programmed test methods
-
Burst pressure and material fatigue tester. Including the functionality of 3D material fatigue, fully pneumatically controlled. Exceeds the standard specifications of ISO 13.938-2, ASTM D3786 and many other national and international standards. The distinctive flexibility of this burst pressure testing device provides the ability to test a wide variety of materials including textiles, nonwovens, paper, cardboard, plastics and medical products.
-
Also for mouth masks tests according to EN 14683, appendix C. Recently adapted for the fully automatic course of this test. Also for technical textiles. Can be used in the laboratory and the production process. Textest has established itself worldwide with its air permeability measuring equipment. Already 50 years of experience, know-how and development in measurement of air permeability is the basis for this. The Multi-functional Labair IV meets all requirements when it comes to the air permeability of your products.
-
Continuous measurement of the air permeability and / or thickness of fabrics, non-wovens, felts, films and screeners on the moving material directly in the production line. Special features
-
-
- Wide measuring range: air permeability: 1 - 5,000 mm / s (0.2 - 1,000 ft³ / m² / min), thickness: 0-6 mm.
- High measurement accuracy.
- Measurement of cross profiles, length profiles and zigzag profiles.
- Measurement speed up to 200 m / min (660 ft / min). (!)
- High resolution, up to a measuring point of 1 mm.
- Modular system. Easily adaptable to the requirements of the production line.
- Calibratable.
-
-
-
The Textest, FlexAir, is a portable instrument for measuring air permeability, both in the laboratory and on site. It is particularly suitable for measurements on contaminated material, such as used filters. Special features: Compact, lightweight design Portable, ideally suited for on-site measurements Works on battery Automatic test pressure control Measuring head is mounted on a hose of 150cm length Optional PC evaluation software
-
Also for mouth caps testing according to EN 14683, Annex C. The calculation (pressure drop in Pa divided by 4.9) must be performed manually. The Textest, MinAir, for measurements of air permeability and pressure drop. For use as a lab device but also for measurements on location. The Minair operates in accordance with ASTM D 737, DIN 53887, EN ISO 9237, WSP 70.1 and many other national and international testing standards.
-
The Portair is the first and only portable instrument for point or profile measurement of air permeability. Special Features: Wide measuring range. AP: approx. 0.2-1,000 ft³/ft²/min (approx. 1-5,000 l/m²/s), thickness: 0-6mm. The instrument is suitable for both spot and profile measurements. High measurement accuracy High measuring speed up to 200 m / min. (!) High resolution of up to 1mm test point pitch. Lightweight portable instrument, suitable for one-handed operation, even overhead. Touch screen for digital and graphical display of test results. One of a kind worldwide. Operates to all leading testing standards. Calibratable.
-
This thickness measuring device has been used in laboratories all over the world for decades. The depth of measurement, foot shape and test pressure are configured to test materials in accordance with the respective specifications of the applicable ISO, EN and DIN standards. This hand-held thickness gauge has an interface for digital processing of the measurement data.
-
Thickness measuring device based on the model DM 2000 with a measuring foot especially for thickness measurement of geotextiles and geosynthetics. By adding additional weights, the thickness can be measured with different pressure values, as prescribed in the standard EN ISO 9863-1: 2005. The figure shows the device with additional weights for measuring at a pressure of 200 kPa.
-
The specifications of this thickness gauge are the same as the DM 2005. The exception is the manually operated foot movement instead of a motor-driven transport. The stability of the speed of the foot movement is controlled by a delay in the transmission of the control lever.
-
Alternative to the thickness measuring device, DM 2010. Equipped with a measuring unit with LCD, instead of the illuminated, menu-driven touch-screen. This thickness gauge has a segmented display and individual control keys. Of course there is a data output for the digital processing of the measurement results. The DM 2005 model is also available with the options: - Adjustable measuring time - Selectable measuring range
-
Thickness measuring device, standard compliant for various materials. Measuring range optionally up to 10 mm, 25 mm or 50 mm.
- Resolution of your choice, 0.001 or 0.01 mm
- Measuring depth (center of base) 110 mm
- Illuminated graphic touch screen. Menu-driven operation (optionally in German or English)
- Single measurements and measurement series with adjustable number of measurement cycles
- Always up-to-date and simultaneous display of measured value, measuring cycle, mean and standard deviation
- Automatic zero point control
- Adjustable measuring time, from 1 - 60 seconds
- Motor driven constant speed foot movement. (standard 2.5 mm / s)
- Time-saving pre-settable measuring path
- Digital interface
- Footswitch operation
- Software
-
This thickness measuring device combines all the functions of the DM 2010, with the automatic transport of the sample material. The transport speed and sample length are adjustable.
