-
Thermal conductivity range: 0.01 to 500 W / mK Thermal diffusivity range: 0.01 to 300mm² / s The system includes: - Trident Thermal Property Analyzer Electronic Control Unit - Standard Laptop with Windows 10® Operating System - Small Volume Test Cell - Pelican ™ Transport case - C-Therm TC3 ™ Software License Modified Transient Plane Source 1 × MTPS Sensor - Thermal conductivity: 0.01 to 500 W / mK (Max-k) - Temperature: -50ºC to 200ºC (optional up to 500ºC) - Test materials: solids, liquids, powders, pastes Reference Material: Expanded Polystyrene (EPS), LAF6720, Pyrex, Pyroceram, Phosphate Bronze, Copper Transient Plane Source 3 × Flex TPS (hot disc) Kapton based sensors - Thermal conductivity: 0.03 to 500 W / mK - Temperature: -50ºC to 80ºC (optional up to 300ºC) Reference material: stainless steel 304 (x2) Transient Line Source 1 × 150mm TLS Needle Probe - Thermal conductivity: 0.1 to 6 W / mK - Temperature: -55ºC to 200ºC - Test material: viscous / viscous liquids, non-consolidated solids, molten polymers Reference material: Glycerine Climate cabinet is available separately.
-
The C-Therm Tx uses the patented Modified Transient Plane Source (MTPS) technology. The one-sided heat sensor applies an instantaneous constant heat source to the sample. Thermal conductivity and effusivity are measured directly, providing a detailed overview of the thermal properties of the sample.
-
Cette étuve de vieillaThis accelerated aging test oven has 4 compartments, the temperature of which can be individually controlled. Each compartment accommodates a sample holder for 24 test samples. This oven also complies with ISO 188 method A, IEC 811 and technically equivalent standards. This aging test oven offers test conditions with very low temperature variation in time and space, low air velocity and controlled air exchange rate.issement accéléré comporte 4 compartiments dont la température peut être contrôlée individuellement. Chaque compartiment accueille un porte-échantillon pour 24 échantillons de test. Ce four est également conforme à la norme ISO 188 méthode A, CEI 811 et aux normes techniquement équivalentes. Cette étuve de vieillissement offre des conditions de test avec une très faible variation de température dans le temps et dans l'espace, une faible vitesse d'air et un taux de renouvellement d'air maîtrisé.
-
A range of standard-compliant or customer-specific dies. Available with a suitable coupling for our die-cutting machines, type EP 02 and EP 08, or your own die-cutting machine of any other brand. The blades are made of hardened steel and have a spring-loaded ejector mechanism. A guarantee for a perfect standard-compliant cutting quality and an efficient preparation of your test samples.
-
Fogging test according to ISO 6452, ASTM D5393, DIN, VOLVO, and other specific standards for fogging testing. This compact device has a cooling and heating bath in one housing. There is a choice of two cooling systems: EB 03, Tap water cooling, the water temperature must not exceed 18°C for this. EB 03C, Built-in Peltier cooling elements The EB 03 comes with a standard package of accessories. A complete overview of these and the optional accessories can be found in the brochure.
-
Compact pneumatic sample die, for rubber and plastic materials. Capacity up to 25kN, for preparation of test samples in the laboratory. With this punching machine you can choose from a range of standard-compliant or customer-specific punching knives. The machine is equipped with a quick coupling system for the blades.
-
For stress relaxation tests in a temperature range up to 200 ° C, or optionally up to 300 ° C, the test frames are used in combination with the cell ovens. Options such as multiple samples in one temperature, as well as in different temperatures, are available. Various rigs for testing in pull and push force, and in air or in liquids.
-
The TRACEiT® measures 3-D topography, roughness values, Ra opt, Rq opt, Rz opt, and documents the visual perceptions as seen by the human eye. A patented and portable system for non-contact and high-quality measurements and analyzes of surfaces, both on outdoor locations and in the production line. TRACEiT® is the first system in the market with which visual impressions and external characteristics can be reproducibly evaluated, analyzed and documented.
-
Het DigiEye-systeem van VeriVide. Dé oplossing als kleur en aanzicht belangrijk zijn.
Waarom de DigiEye
- Snelle kleurkwaliteitscontrole
- Behoud van productkwaliteit
- Product verduurzaming
- Betrouwbare kleurbeslissingen
Waarom investeren in de DigiEye
- Korte lijnen, en tijd- en kostenbesparing tijdens het ontwikkelingsproces van uw producten
- Verkleining van uw CO2-voetafdruk
Het DigiEye-systeem met software meet kleur, uiterlijke kenmerken en producttextuur. Digitale beoordeling van kleur en aanzicht en het wereldwijd delen van objectieve meetgegevens. Kies voor DigiView om direct de werkelijke kleur van uw product te zien! Wij bieden oplossingen op maat om aan elke wens of eis binnen uw kleurmanagement te voldoen..
Voor welke producten?
DigiEye is breed inzetbaar. Denk aan, o.a. de voedingsmiddelen- en drankenindustrie, textiel, cosmetica, automotive, kunststoffen en composietmaterialen.
-
The CAC-LED 60 light box is the smallest model in this series from VeriVide. Equipped with LED lighting. In addition to daylight, there is a choice of 3 or 4 other light sources. A standard lighting environment is essential for optimal color assessment and control of materials and products. This VeriVide light box also meets the guidelines for equipment for color and product assessment, for uniformity, color fastness, metamerism and test results. All light sources have a very high color rendering index "CRI".
